Casio EX-TR600 User Manual page 20

3.
Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
4.
Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow
arrow to secure it in place.

To replace the battery
1.
Press [p] (Power) to turn off the camera
and then open the battery cover.
2.
Remove the current battery and load a new
one.
As shown in the illustration, pull up the edge of
the battery to remove it.
3.
Close the battery cover.
IMPORTANT!
• The operation lamp (page 8) will flash green for some time after you press [p]
(Power) to turn off the camera. Never remove the battery while the operation lamp
is flashing green. Doing so can result in corruption or loss of data in camera
memory.
OK
CASIO logo
and then

Lens unit
20
Battery
NG
1
2mm
2
Quick Start Basics