NEC WT615 User Manual page 42

7. Adjust the height to keep the projector level by rotating the
feet on the front and the rear.
Tilting the projector will move the Tilt Indicator's slider to the left or
right accordingly. Tilt the projector so that both of the sliders of
"Back/Front" and "Left/Right" are shown at the center. When the
slider reaches the center, it will become green.
8. Press the FOCUS +/– buttons to align the focus of the projected
image.
A press of the FOCUS +/– buttons results in focus being taken simulta-
neously with the adjustment of vertical keystone distortion. See page 102.
Cabinet controls
PC CARD
FOCUS
SOURCE
MENU
SELECT
9. Move the projector away from or closer to the screen and position it
so that the left and right sides of the projected image are aligned
with the width of the screen.
10. Adjust the height of the screen and the height of the stand to align
the lower edge of the projected image with the lower edge of the
screen.
Remote control
VIDEO VIEWER
COMPUTER
AUTO ADJ.
ASPECT SLIDE
PIC-MUTE HELP
VOLUME FOCUS ZOOM
FREEZE 3D REFORM
35
3. Projecting an Image (Basic Operation)
Up Down