Projecting An Image From Av Equipment; Connecting The Projector To Av Equipment - Canon SX50 User Manual

PROJECTING AN IMAGE
FROM AV EQUIPMENT

Connecting the Projector to AV Equipment

Connect the projector and AV equipment.
Connecting to Video Terminals
• Before connecting cables, turn off both the projector and computer.
• SCART terminal is not supported.
To analog video output
(S-VIDEO
terminal)
S terminal
video cable
About the Component Cable
The projector cannot be connected to AV equipment using only the supplied component
cable (RCA/Mini D-sub 15-pin). Purchase either of the following cables according to the
type of the terminal on the AV equipment:
• RCA terminal: RCA x 3/RCA x 3
• D-terminal: D-terminal/ RCA x 3
42
To digital
video output
(AV input
(VIDEO
terminal)
(DVI terminal)
terminal)
Video
AV
cable
cable
To component video output
(D terminal)
Component
cable (D ter-
minal/RCA x
3)
DVI
cable
(RCA terminal)
Component
cable (RCA x 3)
Supplied component
cable (RCA/Mini D-sub
15-pin)
*A component cable
available on the
market is required
to connect the
projector to AV
equipment. (See
memo.)