Getting Started - Parrot MKi9000 Quick Start Manual

Getting started

Associating the control unit with the remote control
If the remote control does not seem to be associated to the
electronic box while using the Parrot MKi9000:
• After verifying the CR2032 battery is properly inserted in
the remote unit, press and hold the Play and green buttons
then press the red button several times. This has to be done
during a 30 seconds period once the ignition is turned on.
> Within 1 to 2 seconds, you should then hear a voice mes-
sage saying "Remote control pairing successful".
• If you are unsuccessful on the first attempt, power off the
unit until you see the "Goodbye" message, power it back
on, and repeat the process.
Selecting the language
• While using the Parrot MKi9000 for the first time, use the jog
wheel to browse through the available languages and press
the jog wheel to confirm your selection.
• In case of a problem during language selection, hold down
the red and green buttons for 2 seconds.
Navigating through the menus
Press the central jog wheel to access the menus. Browse
through the menus by turning the wheel and confirm with the
14
green button or by pressing the wheel. Press the red button or
wait a few seconds to exit the menu.
Pairing and connecting a phone
to the Parrot MKi9000
1. Prior to using your Parrot MKi9000 with your phone for
the very first time, you must initially pair both devices.
From your phone, search for Bluetooth
2. Select «MKi9000» in the list.
3. Enter «0000» on your phone when prompted.
> The Parrot MKi9000 says «Pairing successful» .
> The connection will then be automatic as soon as
you enter your vehicle.
Synchronising the phonebook
• With some Bluetooth phones, the phonebook is automati-
cally synchronized in the kit's memory. Only the contacts
stored in the phone memory are synchronized.
• If your phone doesn't support automatic synchronization,
you can also use the Object Push function of your phone to
send contacts from your mobile to the car kit via Bluetooth.
1. Press the jog wheel and select
contacts.
2. Refer to your phones' user guide for more information
about sending contacts via Object Push.
peripherals.
®
Settings > Receive