NEC NP 610 User Manual page 68

INSTALLATION
SETUP
OPTIONS(1)
OPTIONS(2)
USAGE TIME
SOURCE
INFO.
WIRED LAN*
VERSION
CURRENT SIGNAL
ALL DATA
RESET NETWORK SETTINGS*
CLEAR LAMP HOURS
CLEAR FILTER HOURS
* The asterisk (*) indicates that the default setting varies depending on the signal.
*1: COMPUTER 2(DIGITAL) is not available on NP405 and NP305. The source for the computer 2 analog signal is displayed as "COMPUTER2" on
NP405 and NP305.
*2: DYNAMIC CONTRAST is available on NP410 and NP310 only.
*3: DIGITAL ZOOM is available on NP610S and NP510WS only.
*4: Wired LAN is not supported by NP405 and NP305.
ORIENTATION
CONTROL PANEL LOCK
SECURITY
COMMUNICATION SPEED
CONTROL ID
CONTROL ID NUMBER
CONTROL ID
AUTO ADJUST
FAN MODE
COMPUTER1
COMPUTER2
SIGNAL (ANALOG)*
SELECT
VIDEO
S-VIDEO
WXGA MODE
DEINTERLACE
BEEP
OFF TIMER
STANDBY MODE
AUTO POWER ON(AC)
AUTO POWER ON(COMP1)
AUTO POWER OFF
DEFAULT SOURCE SELECT
LAMP LIFE REMAINING
LAMP HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE NAME
SOURCE INDEX
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SIGNAL TYPE
VIDEO TYPE
SYNC TYPE
SYNC POLARITY
SCAN TYPE
PROJECTOR NAME
IP ADDRESS
SUBNET MASK
4
GATEWAY
MAC ADDRESS
PRODUCT
SERIAL NUMBER
FIRMWARE
DATA
CONTROL ID (when [CONTROL
ID] is set)
4
DESKTOP DESKTOP FRONT, CEILING REAR, DESKTOP REAR,
FRONT CEILING FRONT
OFF OFF, ON
OFF OFF, ON
19200bps 4800bps, 9600bps, 19200bps
1 1–254
OFF OFF, ON
NORMAL OFF, NORMAL, FINE
AUTO AUTO, HIGH, HIGH ALTITUDE
RGB/
RGB/COMPONENT, RGB, COMPONENT
COMPONENT
RGB/
RGB/COMPONENT, RGB, COMPONENT
COMPONENT
1
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N,
AUTO
PAL60, SECAM
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N,
AUTO
PAL60, SECAM
NP610/NP510/
NP410/NP405/
NP310/NP305/
NP610S: OFF OFF, ON
NP510W/
NP410W/
NP510WS: ON
ON OFF, ON
ON OFF, ON
OFF OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
NORMAL NORMAL, POWER-SAVING
OFF OFF, ON
OFF OFF, ON
OFF OFF, 0:05, 0:10, 0:20, 0:30
LAST, AUTO, COMPUTER1, COMPUTER2(DIGITAL)*
LAST
COMPUTER2(ANALOG), VIDEO, S-VIDEO
59
5. Using On-Screen Menu
,
1