ION Vinyl Motion Deluxe Quick Start Manual page 3

Features
1. Platter – Place your record
here.
2. 45 RPM Adapter Holder –
Holds the included 45 RPM
adapter. When not using the
adapter, please place it in this
holder.
3. Tonearm – The fixed tonearm
can be raised and lowered by
hand, or by pressing the raise /
lower lever.
4. Arm Clip – This specially
designed arm clip secures the
tonearm while at rest or when
not in use. The arm clip has
been designed to remain in the
up position while unlocked.
5. Raise / Lower Lever – Raises
and lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch controls the RPM of the turntable
platter.
Note: For best results when playing 78 RPM vinyl records, use a 78
stylus (sold separately). Only use a 78 stylus with 78 RPM vinyl
records. Purchase the iCT06rs 78 stylus at ionaudio.com/ict06rs.
7. Autostop switch – This switch turns autostop on or off.
When autostop is on, the platter will start spinning
when the tonearm is placed over the record and stop
spinning when the record has reached the end. (When
autostop is off, the platter will always spin regardless of
the position of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for
this particular record. This is generally recommended
for 45 RPM records.
8. Volume/Power Knob – To power on Vinyl Motion
Deluxe, turn this knob clockwise until it clicks. When
powered on, use this knob to adjust the volume for the
internal speakers and headphones. To turn off Vinyl
Motion Deluxe, turn this knob counterclockwise until it
clicks.
9. Headphone Output – Connect headphones here (sold separately) to listen to your vinyl.
10. Battery Charging Indicator – The LED will illuminate when charging the battery. The LED will turn off
once the battery is fully charged.
11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker – The record's audio will be played through this built-in speaker.
13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8" stereo
auxiliary input.
14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This
must not be connected to phono level devices.
15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer. Please see the Using Vinyl Motion
Deluxe With Your Computer section of this manual for information. Also, use the included USB cable
to connect Vinyl Motion Deluxe to a USB power adapter connected to a power outlet or your
computer.
1
12
IMPORTANT: Place the included felt slipmat
on the platter; then place your record on the
felt slipmat to carefully hold your records.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your receiver
if you plug in a LINE level device into a
PHONO level input.
3
3
2
4
5
6
13
33
45
78
7
AUTO
STOP
OFF
ON
12
14 15
8
10
11
9