Removing the Fan/Heat Sink Assembly
Maintenance and Service Guide
http://mycomp.su - Maintenance and Service Guide,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука.
Схемы,сервис мануалы,инструкции по разборке ноутбука.
❏
Top cover
(Section
❏
Audio board
❏
USB/power connector board
❏
System board
2. Turn the system board upside down with the expansion
port 3 and external monitor port toward you.
3. Disconnect the fan cable 1 from the system board.
4. Remove the four Phillips PM2.5×5.0 screws 2 that secure the
fan/heat sink assembly to the system board.
5. Remove the fan/heat sink assembly 3.
Removal and Replacement Procedures
5.15)
(Section
5.16)
(Section
(Section
5.20)
5.19)
5–67