Sound Adjustment; (Only When Used With The Iss-6020/Iss-6020G Switcher) - NEC MultiSync XG-1352 Operation Manual

Sound Adjustment (only when used with the ISS-6020/ISS-6020G Switcher)
Adjust the volume to your preference.
Proceed as follows:
1 Press the OPERATE button.
• The "OPERATE" menu is displayed.
2 Use the CURSOR
or
line and press ENTER to display the "SOUND" menu. You can
also select the "SOUND" menu directly by pressing the INPUT
"3" button.
3 Use the CURSOR
or
press ENTER. You can also select an item directoly by pressing
the corresponding number button.
• The sound adjustment screen will be displayed.
Items to select
• VOLUME
• BASS (Not available on XG135LC, XG110LC and XG75A)
• TREBLE (Not available on XG135LC, XG110LC and XG75A)
• BALANCE (Not available on XG135LC, XG110LC and XG75A)
4 Use the CURSOR button to adjust sound controls.
• The CURSOR or
The CURSOR or
5 To end this adjustment, press the END button.
• Whenever the END button is pressed, the screen changes in this
order:
"SOUND" menu OPERATE" menu
NOTE: Volume level is indicated in a red gauge during muting.
button to highlight the "3/SOUND"
button to select a sound function and
button increases the level.
button decreases the level.
Source screen.
– O P E R A T E –
1 / P I C T U R E
2 / P O S I T I O N
3 / S O U N D
4 / I N P U T S E L E C T
5 / S O U R C E I N F O
6 / S T A T I C
7 / C L O S E D C A P T I O N
8 / T I M E R
–
1 / V O L U M E
2 / B A S S
3 / T R E B L E
4 / BA LANCE
SOUND
– VOLUME –
23
BASIC OPERATION
S O U N D –
6 0 %