Table of Contents
Advertisement
When Used with One Switcher (ISS-6020/ISS-6020G)
Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher
allows easy adjustment and signal selection.
INPUT C
INPUT B
INPUT A
From R, G, B, H/V on separate H and
V. on the RGB OUTPUT module
DVD Player
* To connect a COMPONENT signal
of the equipment such as DVD
player to the optional RGB input
board, the projector must
recognize the optional RGB input
board as a COMPONENT input
board. See "RGB/COMPONENT
Search Setting" of the Set-up
manual.
• Make sure that the SW1 LEVEL mode is selected from the CONNECT CONDITION menu. Contact your dealer for the informa-
tion in detail.
• For more information on the Switcher, refer to the user's manual accompanying the ISS-6020/ISS-6020G Switcher.
• All cables mentioned above are optional.
ACAT OUT
R/Cr
G/Y
B/Cb
To INPUT A (RGB,
H/V,V inputs)
5BNC-5BNC coaxial cable
(separate sync)
(recommended)
Audio equipment
INDICATOR
H/HV
V
S-VIDEO
VIDEO
OPTION
3BNC-3BNC cable
(sync on green)
4BNC-4BNC cable
(composite)
11
EXAMPLES OF CONNECTIONS
INPUT SELECT
POWER
ON/OFF
INPUT
SELECT
ENTER
I
OUT
IN
REMOTE1
REMOTE2
To REMOTE1
Optional control cable 15p-15p (CTL-6010)
From REMOTE 1 Terminal on the
SYSTEM CONTROL module
The Switcher ISS-6020/ISS-6020G
Personal computer
VCR
Advertisement
Table of Contents
