Sharp LC-26DV24U Service Manual page 17

1-4: REMOCON PCB (Refer to Fig. 1-4)
1. Disconnect the following connector:
(CP4201).
2. Remove the 2 screws (1).
3. Remove the Remocon PCB in the direction of arrow (A).
1-5: LCD BLOCK (Refer to Fig. 1-5)
1. Disconnect the following connectors:
(CP302, CP2804 and CP4303).
2. Remove the Holder Panel.
3. Remove the 4 screws (1).
4. Remove the LCD Block in the direction of arrow (A).
5. Remove the 4 screws (2).
6. Remove the Angle Main.
Angle Main
(2)
Holder Panel
(1)
1-6: DIGITAL PCB (Refer to Fig. 1-6)
1. Disconnect the following connector:
(CP3001 and CP4302).
2. Remove the screw (1).
3. Remove the 5 screws (2).
4. Remove the 2 screws (3).
5. Remove the screw (4).
6. Remove the Plate Jack in the direction of arrow (A).
7. Remove the 5 screws (5).
8. Remove the Digital PCB and Shield Digital in the
direction of arrow (B).
DISASSEMBLY INSTRUCTIONS
(1)
(1)
Remocon PCB
(A)
Fig. 1-4
(2)
(2)
(2)
Angle Main
(1)
(1)
(1)
LCD Block
Holder Panel
(A)
Fig. 1-5
(2)
(3)
(2)
(4)
Plate Jack
1-7: POWER PCB (Refer to Fig. 1-7)
1. Remove the 5 screws (1).
2. Remove the Power PCB in the direction of arrow.
1-8: COVER LCD (Refer to Fig. 1-8)
1. Remove the 4 screws (1).
2. Remove the screw (2).
3. Remove the Cover LCD in the direction of arrow.
(2)
(1)
LCD Panel
B1-2
(5)
(5)
(1)
(5)
(5)
(5)
Shield Digital
(A)
Digital PCB
(B)
(1)
(1)
(1)
(1)
(1)
(1)
Power PCB
(1)
Cover LCD
(1)
Fig. 1-6
Fig. 1-7
(1)
Fig. 1-8