Using A Usb Mouse - NEC MultiSync LT156 User Manual

2. Use the ▲ or ▼ button to highlight your selection and press the
Enter button to place a check mark next to an option. This action
enables that feature.
Press the Enter button again to clear the check box.
If you select an item with a solid triangle
button on the remote control or the projector cabinet, you can
enable all the items within that submenu.
Also you can turn on an item within the submenu without placing
a check mark on the main menu item.
NOTE: Up to 12 main menu items (within Basic/Custom Menu Edit, not
including submenu items) can be selected.
3. In order for the changes to take effect, use the
the remote control or the projector cabinet to highlight "OK",
then press the Enter button. To cancel the changes, use the ▲ or
▼ buttons to highlight "Cancel" and press the "Enter" button.
To return to the factory default, select "Reset" then press the "En-
ter" button.
The default Basic/Custom Menu items are:
Source Select (RGB [DVI (DIGITAL) / DVI (ANALOG) on LT156],
Video, S-Video and PC Card Viewer), Picture, Volume, Image Op-
tions (Keystone, Color Temperature and Lamp Mode), Projector
Options (Menu and Setup), Tools (Capture, PC Card Files and
ChalkBoard) and Help (Contents and Information)
NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen, you
cannot cancel the changes on the Menu screen. However, you can re-edit the
menu items over again as described in the steps above.
NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you
get the "Confirmation Change Menu" upon completion of "Basic/Custom Menu"
editing. In this case, selecting "Yes" then "Enter" will close all the menus and
apply the changes from the Advanced menu to the Basic/Custom Menu. If you
select "No" then "Enter" functions, then all menu items will return to the Ad-
vanced menu, but your changes will still be available within the "Basic/Custom
Menu" selection. To display the previously tailored Basic/Custom Menu, select
"Basic/Custom Menu" from the "Menu Mode".
An item "To Advanced Menu" will be added to the bottom of the Basic/
Custom Menu.
Selecting this item and pressing the "Enter" button will display the "Ad-
vanced Menu" features.

Using a USB Mouse

Using a USB mouse gives you a smooth operation. A commercially
available USB mouse is required.
NOTE: There may be some brands of USB mouse that the projector does not
support.
and press the Enter
Operate the Menus using the USB mouse:
Mouse Cursor:
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
Menu Display:
or button on
Clicking with a mouse button displays the main menu.
Clicking
To close the menu, click anywhere in the background.
Adjusting and Setting Display:
You can select a menu item and click with a mouse button to make
adjustments and setting.
Examples:
Click (or press and hold) the mouse button
brightness.
Or click and drag the mouse button on the slide bar horizontally to
adjust it.
To save the adjustments, click
If you click anywhere in the background while displaying adjust-
ment and setting menu or dialog box, you will get the main menu at
the clicking point.
E – 30
displays the pull-down menu.
. The display is closed.
or to adjust the