Symbol LS 4071 Quick Reference Manual page 9

7
RS-232C Host Types
Three RS-232C hosts are set up with their own parameter default
settings. Selecting the ICL, Fujitsu or Nixdorf RS-232C terminal
sets the defaults listed on the following page. These defaults
take precedence over Standard RS-232 defaults. So, if you've
selected Fujitsu RS-232C, then select the Standard RS-232
defaults, the Fujitsu defaults still take precedence. To return
to the factory set defaults, scan the SET ALL DEFAULTS bar
code below. See the table on the following page for terminal
specific defaults.
SET ALL DEFAULTS