Scanning Made Easy; Ready, Test, Scan - Symbol LS 4071 Quick Reference Manual

Introduction
The LS 4071 is a high performance scanner that lets you scan a
bar code and transmit it to a base station up to 10 feet (3 meters)
away, without a physical cable to limit your movement. Instead,
the scanner communicates with the base station through a low
power radio transmission.

Scanning Made Easy

To install the scanner or change the different programmable
parameters of the LS 4071, see the Product Reference Guide.
If you are using a Synapse cable, select the host type by scanning
the appropriate bar code packed with the cable. If you are not
using a Synapse cable, scan one of the bar codes beginning on
page 6.
If you need assistance, contact the technical person in charge of
scanning at your site, or Symbol Technologies.

Ready, Test, Scan

Ready
Make sure connections are secure, and the battery pack is
charged. The battery must be charged before the scanner's
initial use, and after each day's use. Placing the scanner in its
base station between uses will help maintain the battery's
charge.
Be sure the scanner is "paired" to the base station by scan-
ning the Pairing bar code on the base.
1