Transferring Files Using Ftp Command From The Operation Terminal - NEC IP8800/S2400 Series Troubleshooting Manual

5.
Collecting Failure Information
...........
...............................................................................
........................................................
Operation normal end.
########## Dump files' Information ##########
***** ls -l /dump0 *****
total 2344
-rwxrwxrwx 1 root wheel 2400114 Dec 8 16:46 rmdump
***** ls -l /usr/var/hardware *****
-rwxrwxrwx 1 root wheel 264198 Dec 8 16:43 ni00.000
########## End of Dump files' Information ##########
########## Core files' Information ##########
***** ls -l /usr/var/core *****
No Core files
########## End of Core files' Information ##########
Transferred support.tgz .
Executing.
...............................................................................
...........
...............................................................................
........................................................
Operation normal end.
>
1. Execute command.
2. Specify the remote host name.
3. Specify a user name.
4. Enter a password.
5. Specify a transfer target directory.
6. Specify a file name.
5.2.4 Transferring Files Using ftp Command from the Operation
Terminal
(1) Collecting dump information files from the remote operation terminal
Table 5-3: Files That Can Be Acquired Using ftp Command
No. File Name Specified for
"get"
1 .dump
2 .dump0
3 .hardware
150
Files under /dump0 and /usr/var/hardware (compressed)
(In Ver.10.5 or earlier, files under /dump0 and /dump1 (compressed))
Files under /dump0 (compressed)
Files under /usr/var/hardware (compressed) (Ver.10.5 or later)
Acquired Files