Collecting Failure Information; Collecting Failure Information Using Ftp Command From The Operation Terminal - NEC IP8800/S2400 Series Troubleshooting Manual

5.

Collecting Failure Information

5.1 Collecting Failure Information
The information on failures can be collected at once using the show tech-support command. This command can
also transfer the collected failure information to a specified ftp server (see
Files Using show tech-support
Memory dump at failure occurrence time can be collected by using the dump command.
5.1.1 Collecting Failure Information Using ftp Command from the
Operation Terminal
(1) Acquire failure information from the remote operation terminal
Table 5-1: Available Information via "ftp"
No. File Name Specified for "get"
1 .show-tech
2 .show-tech-unicast
3 .show-tech-multicast
4 .show-tech-layer-2
138
Command").
Result of show tech-support
Result of show tech-support unicast
Result of show tech-support multicast
Result of show tech-support layer-2
"5.2.3 Transferring Maintenance Information
Acquiring Basic Information