Pioneer X-HM50-K Operating Instructions Manual page 21

Listening to the DAB (continued)
n
Displaying DAB radio information
Press the
DAB/RDS DISPLAY
display more information about the selected DAB
station.
DLS (Dynamic Label Segment)
When tuned to a station that's broadcasting DLS text
data, the text will scroll across the display.
Program Type
Displays the type of program.
Multiplex Name
Displays the name of the current multiplex.
Channel and Frequency
Displays the channel and frequency of the current
multiplex.
Bit Rate and Audio Mode
Displays the station's bit rate and audio mode (stereo or
mono).
Signal Quality
Displays the signal quality.
0 – 59 : Poor reception
60 – 79 : Good reception
80 – 100 : Excellent reception
Sensitivity
Display the sensitivity of reception. Keep 100 % for good
reception.
n DAB setup
Use the following functions and settings to set up DAB
digital radio.
1
Press the DAB MENU button repeatedly until the
item to be set appears.
2
Press the ENTER button.
The items are explained below.
button repeatedly to
Scroll
Auto Scan?
This setting determines which DAB frequency range of
Band III is scanned by the Auto Scan function (see page
20).
(default)
: Band III (11B.12D)
UK
: Band III (5A.13F)
All Band 3
Tuning Aid?
With the Tuning Aid, you can adjust the position and
direction of the DAB/FM aerial (see page 7 for adjusting
the aerial) while monitoring the signal strength on the
display. If the letter "
the signal strength is Bad. If the letter "
means the signal strength is Good.
To display the letter "
or button to select the other multiplexes (Band
III: 5A.13F).
Multiplex number
St. Order?
With this setting, you can change the order of stations
in the station list.
Press the or
options, and then press the
(default)
Alphabet
Favorite : Sort stations by favorites. The stations you
select the most will appear at the top of the list.
Active : Sort by active stations. Receivable stations
appear at the top of the list. Stations that cannot be
received properly appear at the bottom of the list.
Multiplex : Sort stations by multiplex.
: Delete all of the stations that cannot be
Trim List
received properly from the list.
DRC Setting?
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels.ideal for listening to the radio late at
night when you don't want to disturb anyone.
Press the or
options, and then press the
(default)
: DRC off.
DRC 0
: Large reduction in dynamic range.
DRC 1
: Small reduction in dynamic range.
DRC 1/2
n
Presetting DAB stations manually
1
Tune into the station that you want to store as a
preset (see page 20).
2
Press the MEMORY button.
The preset number flashes.
3
Press the PRESET ( or
4
To store the station, press the MEMORY button.
5
Repeat steps 1 to 4 to preset more DAB stations.
21
" appears on the display, it means
B
" appears, it
G
", adjust the antenna. Press the
G
G (Good) or B (Bad)
button to select the following
button.
ENTER
: Sort stations alphabetically.
button to select the following
ENTER button.
) button to select a preset.