Reducing The Brightness Of Closed Caption; Setting The Power On Mode; Setting The Protocol Set; Signal Information Menu - NEC split screen Model Operation Manual

Information
CLOSED CAPTION settings
OFF: This exits the closed caption mode.
CAPTION1~4: Text is superimposed.
TEXT1~4: Text is displayed in full screen.
A closed caption signal may not be decoded in the
following signature;
1. when a video tape has been dubbed.
2. when the signal reception is weak.
3. when the signal reception is nonstandard.
When using closed captioned channel or the text mode,
the text screen always appears.
When there is no signal, however, the text screen will
not display text characters.

Reducing the brightness of Closed Caption

Use this to reduce the brightness of Closed Caption.
Example: Setting "NORMAL"
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "CAPTION CONT" of "FUNCTION" menu, select
"NORMAL".
FUNCTION
ADVANCED OSM
POWER MGT.
INPUT SKIP
SUB. PICTURE
ZOOM NAV
PICTURE FREEZE
PDP SAVER
CLOSED CAPTION
CAPTION CONT
PWR. ON MODE
PROTOCOL SET
SEL. ADJ.
Information
CAPTION CONT settings
NORMAL: Closed Caption brightness is set to normal.
LOW: Closed Caption brightness is set to lower.

Setting the power on mode

This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to "VIDEO2"
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "FUNCTION" menu, select "PWR.ON MODE ", then
press the MENU/ENTER button.
The "PWR.ON MODE " screen appears.
On "INPUT " of "PWR.ON MODE " menu, select
"VIDEO2".
The available inputs depend on the setting of input.
PWR. ON MODE
INPUT
VOLUME
SEL. ADJ.
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2: VIDEO input mode.
DVD/HD1~4: DVD/HD input mode.
PC/RGB: PC/RGB input mode.
MULTI: Multi screen mode.
To set MULTI INPUT
• Set the INPUT button to "MULTI ", then press the
MENU/ENTER button.
: OFF
: OFF
: OFF
: BTM LEFT
: S BY S1
: MANUAL
: OFF
: NORMAL
: OFF
EXIT RETURN
: VIDEO2
: 22
EXIT RETURN
En-31
The "MULTI SCREEN SETTING " will appear on
the screen.
• Use the and buttons to select "MULTI MODE
", then use the and buttons to choose from "SIDE
BY SIDE1~3" and "PICTURE IN PICTURE
(BOTTOM LEFT~TOP LEFT)".
• Use the and buttons to select "MAIN "/"SUB "
and "LEFT "/"RIGHT ", then use the
to choose from "VIDEO1~2 ", "DVD/HD1~4 " and
"PC/RGB ".
PICTURE IN PICTURE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM RIGHT
INPUT MODE
MAIN : VIDEO1
SUB
: DVD/HD1
SEL. ADJ. EXIT RETURN
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 42: The level of sound volume.

Setting the Protocol set

Use this setting when connecting a device which uses
special protocol for RS-232C communication.
Example: Setting "ON"
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "PROTOCOL SET" of "FUNCTION" menu, select
"ON".
FUNCTION
ADVANCED OSM
POWER MGT.
INPUT SKIP
SUB. PICTURE
ZOOM NAV
PICTURE FREEZE
PDP SAVER
CLOSED CAPTION
CAPTION CONT
PWR. ON MODE
PROTOCOL SET
SEL. ADJ.
Information
PROTOCOL SET settings
ON: When special protocol is used.
OFF: When NEC protocol is used (normal).
* Consult your dealer for details of protocol.

Signal Information Menu

Checking the frequencies, polarities of input
signals, and resolution
Use this function to check the frequencies and polarities
of the signals currently being input from a computer, etc.
On "MAIN MENU", select "SIGNAL INFO.", then press
the MENU/ENTER button.
The "SIGNAL INFORMATION" is displayed.
SIGNAL INFORMATION
H. FREQUENCY
V. FREQUENCY
H. POLARITY
V. POLARITY
MEMORY
RESOLUTION
PC: MEMORY will be displayed.
Others: MODE will be displayed.
and buttons
SIDE BY SIDE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT : VIDEO1
RIGHT
: DVD/HD1
SEL. ADJ. EXIT RETURN
: OFF
: OFF
: OFF
: BTM LEFT
: S BY S1
: MANUAL
: OFF
: LOW
: ON
EXIT RETURN
: 48.4KHz
: 60.0Hz
: NEGATIVE
: NEGATIVE
: 24
: 1024 768
RETURN
EXIT