Pfaff 1183-712/02 Instruction Manual page 16

Controls
Start backtack
End backtack
Needle position
Foot position after stop
Foot position after trimming
Thread trimmer
Darning program
Counted seam
TE/Speed
7 - 3
This function key is not used on this machine.
This function key is not used on this machine.
If this key is pressed the "needle raised after sewing stop" function is switched on or off.
When the function is switched on, the needle positions at t.d.c. after sewing stops.
This function key is not used on this machine.
This function key is not used on this machine.
If this key is pressed the thread trimming function is switched on or off.
This function key is not used on this machine.
This function key is not used on this machine.
If this key is pressed once the speed limit for the sewing mode is activated.
If this key is pressed twice (within 5 seconds) the machine changes from sewing to input
mode.