Important Safety Instructions - Fender G-DEC3 Thirty Owner's Manual

Important Safety Instructions

The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
11) Only use attachments/accessories
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
This product is covered by one or more of the following patents: R.O.C. Taiwan I290002; UK Pat. GB2435368B
Fender®, G–DEC® , Blackface™, Fender® FUSE™ and Dyna–Touch™ are trademarks of FMIC.
2
specified by the
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA, USA
Other trademarks are property of their respective owners.
Copyright © 2010 FMIC. All rights reserved.
f e n d e r . c o m
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15) To completely disconnect this apparatus from the AC mains,
disconnect the power supply cord plug from the AC receptacle.
16) The mains plug of the power supply cord shall remain readily
operable.
17) WARNING – To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
18) Do not expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
19) Maintain at least 6 inches (15.25 cm) of unobstructed air space
behind the unit to allow for proper ventilation and cooling of
the unit.
20) CAUTION – For rack mounted power amplifiers, keep all wiring
and materials away from the sides of the unit and allow the
unit to cool down for 2 minutes before pulling from a rack
enclosure.
21) Amplifiers and loudspeaker systems, and ear/headphones (if
equipped) are capable of producing very high sound pressure
levels which may cause temporary or permanent hearing
damage. Use care when setting and adjusting volume levels
during use.
22) FCC Part 15 Compliance Statement (for digital products, as
applicable) - Part 15.21: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment. NOTE: The
manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user's authority to operate the
equipment.
23) WARNING – To maintain product safety, products with internal
or external (battery pack) batteries:
product in which they are installed, shall not be exposed to
excessive heat such as sunshine, fire or the like. •There may be
a danger of explosion if the battery is incorrectly connected/
replaced. Replace only with the same or equivalent type battery
specified in the instructions or on the product.
24) CAUTION – Unplug unit and allow it to cool before touching/
replacing vacuum tubes.
•Batteries and/or the