Table of Contents
Advertisement
T
A
C
V
O
DJUST
ALL
OLUME
While you are speaking on the phone, the PSIII will
display:
C.Cross
95551212
L 1
♦ Press the Scroll
or Scroll
Volume, the PSIII will display:
Call Volume
Maximum
L 1
♦ Press the Scroll
key to lower or Scroll
increase Call Volume.
NOTE: In the stand by state, press the FNC key→3→1→1.
Operation and the display are the same to those above.
key to adjust Call
key to
19
T
U
I
C
O
SE
NCOMING
CATION
NOTE: Incoming call vibration notification is not
active when either L1
To Enable Incoming Call Vibration Notifica-
tion:
♦ Press the FNC key →3→1→2. PSIII displays:
Vibration
[1]On
[2]Off
♦ Select [1] On, then press the FNC key or 1.
♦ After two seconds, the incoming call vibration
notification ("V") will appear on the LCD.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
V
N
ALL
IBRATION
OTIFI
or L2*
is busy.
-
Advertisement
Table of Contents
