Connecting The Charger; Register The Handset; Harger; Andset - NEC DTR-IR-2 User Manual

Connecting the Charger

1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall
outlet.
2 Set the charger on a desk or tabletop, and place the handset in the charger
with the keypad facing forward. (See
into the Handset" on page
Charge the handset battery pack for at least 15~20 hours before
note
using your new cordless telephone for the first time.

Register the Handset

Handsets supplied with the phone are registered to the base by the factory.
When charged, pre-registered handsets display a handset ID number. Handsets
that have not been registered display
When you register a handset to the base, the handset ID will be assigned.
1 Before registering the handset, the battery pack MUST be charged for 15~20 hours.
2 Place the handset in the main base unit to begin registration.
While the handset is registering, H an ds e t Re gi s te ri ng will appear in the LCD. When Re gi st ra t io n
3
Co mple te is displayed, the handset has been registered to the base. If Reg istra tion Fail ed appears, please
try these steps again.
The handset can be registered when the main base is in standby
note
mode.
G e t t i n g S t a r t e d
"B. Install the Rechargeable Battery Pack
6.)
P la ce ha n ds et on m ai n b a se to r eg is te r
.
[ 9 ]