Kenwood TK-860HG Service Manual page 25

TK-860HG/862HG
Adjustment Location
Switch (TK-860HG)
LED
Volume
Power up/down
MIC jack Programmable function keys
Note
• Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-56D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
• EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
24
ADJUSTMENT
Channel
Display up/down
Adjustment Point
TX-RX UNIT (A/2)
L22
TC106
PLL/VCO
CV
L13
L5
TC109
Repair Jig
• Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-
860HG/862HG. The jig facilitates the voltage check when
the voltage on the component side TX-RX unit is checked
during repairs.
• Extension cable
Part No. : E30-3404-05
Extension cable
RSSI
Ax4 Bx2
Ax5
Ax2
A ø2.6 x 6
B M3 x 8