Specifications; Monitor Specifications - NEC MultiSync V721 60000531 60000531 User Manual

Specifications

Monitor Specifications

Picture Tube
Viewable Image Size:
Input Signal
Display Colours
Synchronization Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory setting)
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
NOTE: Technical specifications are subject to change without notice.
MultiSync V521
Diagonal: 38 cm (15 inch)
35 cm (13.8 inch)
Radius:
1080 mm
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colours
Analog input:
Horizontal:
31 kHz to 70 kHz
Vertical: 55 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 110 Hz
832 x 624 @ 55 to 106 Hz
1024 x768 @ 55 to 87 Hz
1152 x 870 @ 55 to 77 Hz
1280 x 1024 @ 55 to 66 Hz
Horizontal: 270 mm
Vertical: 203 mm
280 mm
210 mm
AC 100 - 240V, 50 - 60 Hz
1.3 A @ 100 - 240V
360(W) x 380(H) x 381(D) mm
12.5 kg
0 °C to +35 °C
Humidity:
30% to 80%
Altitude:
0 to 3000 m
-20 °C to +60 °C
Humidity:
10% to 90%
Altitude:
0 to 13700 m
English-12
Notes
90° deflection,
0.28 mm trio dot pitch,
medium short persistence
phosphor, multi-layered,
anti-static screen coating,
semi-tint screen,
Invar Shadow Mask.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for
optimal display performance.
Dependent upon signal
timing used, and does not
include border area.
Dependent upon signal
timing used, and does not
include border area.