Ariens Sno-Thro 924108 Owner's/Operator's Manual page 9

M
AINTENANCE AND
Prepare Unit
Before cleaning or making any inspections, repairs, etc.:
disengage clutches, stop unit and engine, remove key,
allow moving parts to stop. Disconnect spark plug wire
and keep wire away from plug to prevent accidental start-
up.
Allow hot parts to cool.
Service Position
Before tipping unit up onto housing, remove enough fuel
so no spillage will occur. Assure unit is secure and will
not tip over during maintenance.
Explosive Fuel
Fuel is highly flammable and its vapors are explosive.
Handle with care. Use an approved fuel container.
NO smoking, NO sparks, NO flames. ALWAYS allow
engine to cool before servicing.
NEVER fill fuel tank when engine is running or hot from
operation.
NEVER fill or drain fuel tank indoors.
Replace fuel cap securely and clean up spilled fuel.
Replacement Parts
ALWAYS maintain unit in safe operating condition.
Damaged or worn out muffler can cause fire or explosion.
Hardware
Keep hardware tight. Check shear bolts frequently.
Cleaning
Keep unit free of ice or other debris. Clean up oil or fuel
spills.
Storage
For unit storage or extended storage:
• NEVER store with fuel in fuel tank, inside a building
where any ignition sources are present
• Allow engine to cool completely
• For extended storage, clean unit thoroughly. See
Engine Manual for proper storage.
10/99
S S
ERVICE AFETY
Transport
Use extra care when loading or unloading unit onto trailer
or truck.
Secure unit chassis to transport vehicle.
NEVER secure from rods or linkages that could be
damaged.
DO NOT transport machine while engine is running.
Close Fuel Shut Off Valve before transport to prevent fuel
leakage.
A
TTACHMENTS AND
Use only attachments or accessories designed for your
unit.
Check attachment components frequently. If worn or
damaged, replace with manufacturer's recommended
parts.
A
CCESSORIES
7