Miscellaneous; Hardware Setup - Onkyo TX-NR737 Basic Manual

6.Miscellaneous

Volume Setup
Make the detailed volume setting of the unit.
Setting item Default Value
Volume Display Absolute
Muting Level - dB
Maximum Volume Off
Power On Volume Last
Headphone Level 0dB
Setting Details
Switch the volume display between the
absolute value and relative value. The absolute
value 82 is equivalent to the relative value 0dB.
"Absolute": Absolute value such as "1" to "99"
"Relative(THX)": Relative value such as "-81dB"
and "+18dB"
If the absolute value is set to 82, "82Ref"
will appear on the display and the "THX"
indicator will flash.
Set the volume lowered from the listening
volume when muting is on.
Select a value from "- dB", "-50dB" to "-10dB".
(in 10dB increments)
Set the maximum value to avoid too high
volume. Select a value from "Off", "50" to "99".
Set the volume level of when the power is
turned on. Select a value from "Last" (Volume
level before entering standby mode), "Min", "1"
to "99" and "Max".
You cannot set a higher value than that of
"Maximum Volume".
Adjust the volume level difference between
speakers and headphones. Select a value
between "-12dB" to "+12dB".
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting item Default Value
On Screen Display On
Language English
Screen Saver 3min

7.Hardware Setup

Tuner
Setting item Default Value
AM/FM Frequency 10kHz/200kHz
Step (North
American and
Taiwanese models)
AM Frequency 9kHz
Step (European,
Australian and Asian
models)
Advanced Settings
Setting Details
Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Select the on-screen display language.
Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
Setting Details
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
When this setting is changed, all radio
presets are deleted.
Default values vary depending on the
regions.
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
When this setting is changed, all radio
presets are deleted.
Default values vary depending on the
regions.
37