JVC KD-G140J Service Manual page 19

3.2.9 Removing the clamper assembly (See Fig.17)
• Remove the MECHANISM CONTROL BOARD assembly, top
cover and mechanism section.
(1) From the top side of the mechanism section, release the
clamper spring.
(2) Move the clamper assembly in the direction of the arrow,
and then release the joints (k and m).
(3) Take out the clamper assembly from the T.M chassis
assembly.
Clamper assembly
k
T.M. chassis assembly
Fig.17
Clamper spring
m
(No.MA372<Rev.004>)1-19