Nikon D5 User Manual page 194

3
Select a preset.
Press the U button and rotate the sub-command dial until
the desired white balance preset (d-1 to d-6) is displayed in
the rear control panel.
U button
4
Select direct measurement mode.
Release the U button briefly and then
press the button until the L icon in
the rear control panel starts to flash. A
flashing D will also appear in the top
control panel and viewfinder.
r
5
Measure white balance.
In the few seconds before the indicators stop
flashing, frame the reference object so that it fills the
viewfinder and press the shutter-release button all
the way down. The camera will measure a value for white
balance and store it in the preset selected in Step 3. No
photograph will be recorded; white balance can be measured
accurately even when the camera is not in focus.
170
Sub-command dial Rear control panel
Top control panel
Rear control panel
Viewfinder