Nikon D5 User Manual page 131

A
AF-S/AF-I Teleconverters
If 3D-tracking or auto-area AF is selected for AF-area mode when an
AF-S/AF-I teleconverter is used, single-point AF will automatically be
selected at combined apertures slower than f/5.6.
A
Manual Focus
Single-point AF is automatically selected when manual focus is used.
A
See Also
For information on how autofocus adjusts to changes in the distance to
the subject, see Custom Setting a3 (Focus tracking with lock-on,
0 326). To adjust settings for 3D-tracking, use Custom Settings a4 (3D-
tracking face-detection, 0 327) and a5 (3D-tracking watch area,
0 327). See Custom Setting a7 (Store by orientation, 0 328) for
information on choosing different focus points and/or AF-area modes
for portrait- and landscape-orientation photographs, a9 (Limit AF-area
mode selection, 0 329) for information on limiting AF-area mode
selection, a12 (Focus point options, 0 331) for information on
choosing how the focus point is displayed in dynamic-area AF, and f4
(Customize command dials) > Change main/sub (0 357) for
information on using the main command dial to choose the AF-area
mode. See page 49 for information on the autofocus options available
in live view or during movie recording.
N
107