Set Fan Operation Switch - Honeywell RTHL2510 Quick Installation Manual

8

Set fan operation switch

Move the switch to the proper setting:
Gas or Oil: For gas or oil heating systems, leave the fan
operation switch in this factory-set position (for systems that
control the fan in a call for heat).
Electric or Heat Pump: Change the switch to this
setting for heat pump or electric heat systems. (This setting
is for systems that allow the thermostat to control the fan in a
call for heat, if a fan wire is connected to the G terminal.)
69-2714EF—01
RTHXXXX
GAS OR OIL
ELECTRIC OR HEAT PUMP
GAS OR OIL
ELECTRIC OR HEAT PUMP
8
M32716