Front And Rear Panel - Bush DFTA45R Instruction Manual

Front and Rear Panel

1. Front panel
1 POWER BUTTON:
2 STANDBY INDICATOR:
Standby Mode or Green if the unit is on.
3 REMOTE CONTROL SENSOR:
4 USB: USB Input Supports JPEG Files, Music Files, Video Files for Recording and
Software Upgrade
5 CHANNEL UP/DOWN:
6 STANDBY: Press the Standby Button to turn the unit to standby.
2. Rear panel
R F LOOP
R F IN
THROUGH
1 2
1 RF IN : This socket connects to your external Aerial.
2 RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or
another video system.
3 COAXIAL: This socket connects to a Coaxial cable on your surround sound system.
4 VIDEO: This socket outputs composite video signal.
5 COMPONENT VIDEO OUT:
terminals.
6 AUDIO L/R: This socket outputs Analog Audio L/R signal.
7 HDMI High definition audio and video output used to connect to a HDMI device
8 MAINS CABLE: This is used to connect to your main power supply.
Press the Power Button to turn the unit on or off.
Standby Indicator will be red if the Set Top Box is in
Receives the Signal from the Remote Control.
Press the Channel Buttons to change the Channel.
Digital
Audio
Pr Pb L
VIDEO Y R
Coaxial
COMPONENT VIDEO / AUDIO OUT
3 4 5 6
These sockets connect to your TV component input
3
DFTA45R
POWER SUPPLY: AC 230V ~ 50Hz
MAX POWER CONSUMPTION: 8 WATTS
BUSH WARRANTY: 1800 509 394 AUSTRALIA
BUSH WARRANTY: 0800 450 259 NEW ZEALAND
Serial No.:
MADE IN PRC
N14119
5
5 6 4
AC 230V
~50Hz
2010/10
HDMI OUT
7 8