Related Manuals for Bush DFTA45R
Summary of Contents for Bush DFTA45R
- Page 1 High Definition Digital Set Top Box With USB Record DFTA45R The Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.95 per minute)
- Page 3 Safety Instructions Always read the safety instructions carefully Keep this Instruction Manual for future reference Keep this device away from humidity Lay this device on a reliable flat surface before setting it up Do not stand it on soft furnishings If any of the following situation arises, get the Set Top Box checked by a service technician: It has been exposed to moisture...
- Page 4 Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit s m any features and to ensure you get the very best from your purchase.
- Page 5 About the Set Top Box This DVB-T TV Receiver allows you to access Free-to-Air Digital TV Channels and Radio Broadcasts on your TV set. Its digital reception covers VHF & UHF band. Digital TV eliminates noise and interference and offers high quality video and audio. An easy to use on-screen installation guide is provided.
-
Page 6: Table Of Contents
Table of Contents Front and Rear Panel ................5 Remote Control ................6-7 Connecting to a Television..............8 Connecting to an Audio System............. 9 Connecting to a DVD Recorder or VCR..........10 First Time Installation.................11 Basic Operations................11-19 Troubleshooting ................20 Technical Specifications..............21 Warranty................... -
Page 7: Front And Rear Panel
2. Rear panel DFTA45R POWER SUPPLY: AC 230V ~ 50Hz MAX POWER CONSUMPTION: 8 WATTS AC 230V BUSH WARRANTY: 1800 509 394 AUSTRALIA Digital ~50Hz BUSH WARRANTY: 0800 450 259 NEW ZEALAND 2010/10 Audio Serial No.: LOOP THROUGH MADE IN PRC VIDEO... -
Page 8: Remote Control
Remote Control 1. MUTE: Press the Mute Button to switch off the Sound only. Press again to restore audio output STANDBY MUTE 2. INFO: Press the INFO Button to display the current channel information INFO 3. TTX: Press the TTX to enter the Teletext Menu 4. -
Page 9: Remote Control
Installing the Batteries Remove the battery cover from the Remote Control and put 2xAAA size batteries inside the compartment. The diagram inside the Battery Compartment shows the correct way to install the batteries. 1.Open the cover 2.Install batteries 3.Close the cover Using the Remote Control To use the Remote Control, point it towards the front of the Digital Set Top Box. -
Page 10: Connecting To A Television
Connecting to a Television For a basic connection from your Set Top Box to the television, use the Composite connection outlined below. For a higher quality connection, use the Component Video connection outlined below combined with the Composite Audio Connection. For the highest quality audio and video connection use a direct HDMI... -
Page 11: Connecting To An Audio System
Connecting to an Audio System 100-240V~ 50/60Hz Digital Audio LOOP THROUGH VIDEO Coaxial HDMI OUT COMPONENT VIDEO / AUDIO OUT Coaxial cable Coaxial Amplifier VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC 3 STEREO MODE TEST CHANNEL KARAOKE MUTE DOWN BASS TREBLE ECHO MIC VOL... -
Page 12: Connecting To A Dvd Recorder Or Vcr
Connecting to a DVD Recorder or VCR TV Aerial 100-240V~ 50/60Hz Digital Audio LOOP THROUGH CVBS Coaxial HDMI OUT COMPONENT VIDEO / AUDIO OUT... -
Page 13: First Time Installation
First Time Installation After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press the Power button to switch receiver on. If you are using the receiver for the first time or have restored to Factory Default, the Installation Guide will appear on your TV... - Page 14 (2) Program Edit To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password '000000'. Programme Edit ALL TV 001 TV3 002 33 SKIP 003 3/24...
- Page 15 Move a TV or Radio Program/s 1. Select the preferred program then press the RED button. A move symbol will appear 2. Press UP/DOWN to move the program 3. Press OK to confirm 4. Repeat the above steps to move more channels Lock Program/s You can lock selected programs for restricted view.
- Page 16 (6) Video Setting To access the Menu, press MENU then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu. Picture Aspect Ratio 16:9 Wide Screen...
- Page 17 (7) Channel Search To access the menu, press MENU select [Search Channel]. The provides options to adjust the earch hannel settings. Select an option and press RIGHT/LEFT to adjust the setting . Press EXIT to exit Channel Search Auto Search Manual Search Country Australia...
- Page 18 2. Press the RIGHT/LEFT key to select the channel frequency 3. Press OK to start searching channels If a channel is found, it is saved and added to the channels list. If channels can’t be found, then exit the menu. (3) Country Select your country of residence.
- Page 19 (1). OSD Language Select an OSD language (2). Audio Language Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used. (3). Subtitle Language Select the preferred subtitle language. (10) System Setting To access the enu, press MENU...
- Page 20 (3) Restore Factory Default Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm.
- Page 21 - Subtitle Specific: [Small]: Displays the subtitle as small mode. [Normal]: Displays the subtitle as normal mode. [Big]: Displays the subtitle as big mode. - Subtitle BG: [White]: Displays the subtitle in white background. [Transparent]: Displays the subtitle in transparent background. [Grey]: Displays the subtitle in grey background.
- Page 22 Time shift Make sure that a USB or Hard Disc Drive device is connected to the receiver in order to be able to use the time shift function. We recommend that you use a powered Hard Disk Drive as USB Sticks will only allow limited functionality.
-
Page 23: Troubleshooting
Troubleshooting Problem Potential Reasons What to do Connect the power Power isn't connected No picture The power switch is not on Switch on the power Screen shows DVB-T cable not connected Plug in the DVB-T cable No Signal Incorrect setting Conduct a factory reset No or incorrect connection No sound from... -
Page 24: Technical Specifications
Technical Specifications Item Sub Item Parameter Input Frequency 170~230MHz Tuner 470~860MHz -25~-78dBm RF Input level IF Bandwidth 7MHz and 8MHz QPSK,16QAM,64QAM Modulation Decoder Format MPEG4 AVC/H.264 HP@L4 Video MPEG2 MP@ML.HL 576P , 720P, 1080i, 4:3 and 16:9 Output Format HDMI Output Port Decoder Format Audio... -
Page 25: Warranty
In the unlikely event that your product fails to work normally, please contact the Bush Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand) and have your receipt of purchase on hand. This... - Page 28 PO BOX 6287, SILVERWATER NSW 1811 www.bushaustralia.com.au...