Miele T 7944 C Operating Instructions Manual page 34

Problem solving guide
Problem
Water leaks from the
dryer after the
condenser unit has
been cleaned.
The programme does
not start.
Power cut.
The interior drum
lighting does not come
on.
34
Possible cause
– The inner cover of the
condenser unit has not
been locked properly
and/or the condenser
unit has not been
positioned correctly.
– Fluff has collected in
the condenser unit
housing.
No obvious cause.
A programme which was running previously will
continue automatically when power is restored to the
tumble dryer as long as the Cooling down phase had
not been reached.
The lighting switches off
automatically (to save
energy).
Remedy
– Ensure that the
condenser unit is
positioned correctly
and lock the inner
cover.
– Check the rubber
seals.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
– Is the dryer switched
on?
– Is the plug correctly
inserted into the socket
and switched on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
– Switch the dryer off
and then on again.
– If the lamp needs to be
replaced, follow the
instructions in
"Changing the lamp".