User Registration - Alpine X800D Quick Reference Manual

User Registration

You can register up to two users. Configure the User1 and User2 settings for each user.
1
Press the (My Favourites) button.
The My Favourites screen is displayed.
• You cannot access My Favourites screen while
driving.
2
Touch [Start].
The user name input screen for the first user is
displayed.
• After registering the first user, touch [USER2] to
access to USER2's registration screen.
• Touching [Skip] registers the user name as
"USER1" or "USER2" and no BLUETOOTH device
is registered. In this case, the users will not be
switched automatically.
• Touching [Cancel] or pressing the
Favourites) button returns to the original screen
without registering a user.
3
Input the user name from the keypad and
touch [OK].
The BLUETOOTH Device Setup screen is displayed.
• Touch [ ] to edit the name.
4
Touch [Link], then touch [OK].
The BLUETOOTH Device List is displayed.
• The BLUETOOTH devices registered here are used
to automatically identify the user.
Also, a cellular phone can be used as a hands-free
phone.
• Touching [Do not Link] exits user registration
without registering a BLUETOOTH device.
Owner's manual
5
Touch [Search].
The system starts searching for BLUETOOTH
devices.
When the search is completed, the BLUETOOTH
Device List is displayed.
• Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to [ON].
6
Touch a registered BLUETOOTH device and
touch [OK].
My Favourites screen for USER1 or USER2 is
displayed.
(My
• You can edit My Favourites icons.
7
Press the
The My Favourites screen is exited and the display
returns to the original screen.
User Registration
(My Favourites) button.
5
-EN