Picture Options - Samsung pl43d450 User Manual

Basic Features
■ Color Space (Auto / Native / Custom): Adjusts the
range of colors(the color gamut) available to create the
image. To adjust Color, Red, Green, Blue and Reset,
set Color Space to Custom.
■ White Balance: Adjusts the color temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjusts each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
■ Flesh Tone: Emphasizes pink "Flesh Tone."
■ Edge Enhancement (Off / On): Emphasizes object
boundaries.

Picture Options

O
MENUm → Picture → Picture Options →
ENTERE
Picture Options
Color Tone
Size
Digital Noise Filter
HDMI Black Level
Film Mode
Screen Burn Protection
■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic or Standard.
✎
Settings can be adjusted and stored for each external
device connected to an input on the TV.
■ Size: If you have a cable box or satellite receiver, it may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture so it
fits the entire screen.
✎
Available with HD 1080i / 720p signals in 16:9
mode.
16
English
: Normal ►
: 16:9
: Auto
: Normal
: Off
U Move E Enter R Return
P.SIZE
4:3 : Sets the picture to basic (4:3) mode.
✎
Do not set your TV to 4:3 format for a long time.
The borders displayed on the left and right, or
top and bottom of the screen may cause image
retention (screen burn) which are not covered by
the warranty.
Screen Fit: When your TV inputs HDMI (720p / 1080i /
1080p) or Component (1080i / 1080p) signals, displays
the full image without any cut-off.
✎
NOTE
x
To use the Position function after selecting Zoom1,
Zoom2 or Wide Fit, follow these steps:
1. Press the ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTERE button.
5. Press the ► button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
x
To use the Position function after selecting
Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) follow these steps:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the ENTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the ENTERE button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
You can adjust and store settings for each external
device you have connected to an input on the TV.
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit