KX-FL501
1.15.2.1. MAINTENANCE LIST
NO.
OPERATION
1
Document Path
2
Rollers
3
Platen Roller
4
Sensors
5
Glass
6
Abnormal, wear and tear
or loose parts
1.15.2.2. MAINTENANCE CYCLE
No.
1
Separation Roller
2
Separation Rubber (Ref. No. 11)
3
Document Feed Roller (Ref. No. 7)
4
Separation paper (Ref. No. 163)
5
Exit Roller(Ref.No.197)
* These values are standard and may vary depending on usage conditions.
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning.
Document sensor (PS102), Paper feedsensor (PS103),
Hook switch (SW200), Top cover open switch (SW101)
Resist sensor (PC201) and Paper exit sensor (PS50).
Paper sensor (PS1)Confirm the operation of the sensors.
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts.
Item
Cleaning Cycle
3 months
3 months
3 months
3 months
3 months
CHECK
Cycle
7 years*
(100,000 documents)
7 years (100,000 documents) Refer to (P.124).
7 years (100,000 documents) Refer to (P.124).
7 years (100,000 documents) Refer to (P.128).
7 years (100,000 documents) Refer to (P.131).
24
REMARKS
—
Refer to (P.25).
—
See (P.23) and (P.124).
Refer to (P.25).
—
Replacement
Procedure
Refer to (P.128).