Connecting The Microphone - The Singing Machine iSM990BT Instruction Manual

iSM990-ENG-v2_Layout 1 7/23/13 8:56 AM Page 5
Connection

Connecting the Microphone

Insert the small end of the AC adapter into
the DC IN jack on the rear of the unit. Insert
the other end (with the 2 blades) into a
conveniently located AC outlet having
110-240V AC, 50/60Hz.
Notes:
• Only use the supplied AC adapter. Failure to
do so may cause a fire or damage the unit.
• The AC adapter included with this unit is
for its use only. Do not use it with other
equipment.
• Turn off the unit before unplugging the AC
adapter from the unit to avoid damaging
the unit.
• When the unit is not going to be used for
a long time, disconnect the AC adapter
from the AC outlet.
• If the unit acts erratically or malfunctions,
unplug the unit, wait 20 seconds and plug
it back in.
• Never use an AC adapter that is damaged.
Route power lead in a safe manner and
make sure it is not subjected to trapping
or pinching. If the power lead is damaged,
refer to a qualified service agent.
Insert a microphone's plug into the Mic 1
jack . Insert the other microphone's plug
into the Mic 2 jack v (if desired).
Note: Do not drop or tap the mic, as damage
to the mic or speakers may occur. Do not
spin the microphone around for the same
reason.
u
v
5