SMT-i SERIES
ADMINISTRATOR DOCUMENT
o Press Next to advance to next screen
o Skip unused settings such as VLAN, 802.1x, etc. and press Next
o Press Done
o Press Yes to Finish Easy Install
SMT-i5264 AOM (Add-On Module)
SMT-i5264 AOM will register to the OfficeServ system as an IP phone device. It need
the IP phone ID and password during the registration. The SMT-i5264 will receive an IP
phone extension. It can be paired to any IP phone or digital phone as the add-on
module. MMC 209 is used to pair the AOM extension to a master phone.
Press Key 2 first
• Prepare AOM to the set up mode
o Press and hold 2
up mode.
o Press the 3
flashing.
o Two method to set up the AOM
• Use SMT-i5243 phone to set up the AOM.
nd
key from the 1
rd
th
key from the 4
o Enter SMT-i5243 phone to the engineering mode
o Menu -> phone -> phone information -> *153#
o Select Network -> AOM to enter into the set up mode
o Enter the following data
st
column (left most columns) to enter the set
column (right most columns) after this key is
6
QUICK REFERENCE DOCUMENT
MAY 2010
Then, press Key 51