Introduction - Samsung SMT-i 3105 Quick Reference Manual

SMT-i SERIES
ADMINISTRATOR DOCUMENT

Introduction

This quick reference document briefly describes the steps for administrator to set up
the SMT-i3105/5200 series IP devices and to upgrade software on these devices.
These new SMT-I series of IP devices required to have OfficeServ 7000 MP software
v4.46 and up. No license is required to register and to operate these devices.
Preparation:
• OfficeServ 7000 system with v4.46 and up software
• Connect OfficeServ 7000 MP, MGI, PC and SMT-ixxxx to the same data network
• Power SMT-ixxxx devices either by PoE or AC power adaptor
MMCs:
• MMC 727: check software version number
• MMC 830: MP IP address
• MMC 840: IP set information
• MMC 209: AOM paring
• MMC 722: Station key programming
Two methods to enter to the engineering mode:
1. Initial setup
Press and hold * key
a.
phone
2. Subsequent setup
Press *153#
a.
following sequence to display the phone information.
i. There is no need to press any key while powering up SMT-i5243.
When powering up the SMT-i5243 the first time, it will automatically
enter the installation menu.
while phone displays the phone information. Follow the
i. Menu -> Settings -> phone info; for i3105/5210/5220/5230
ii. Menu -> Phone -> phone information; for i5243
while powering up SMT-i3105/5210/5220/5230
2
QUICK REFERENCE DOCUMENT
MAY 2010