Honda TRX90X Owner's Manual page 155

14 TRX90X-32HP26700.book 146 ページ ２０１３年８月５日 月曜日 午後２時２０分
Drive Chain
3. Inspect the drive chain for:
• damaged rollers
• loose pins
• dry or rusted links
• kinked or binding links
• excessive wear
• damaged or missing O-rings
Replace the drive chain (page 151) if it has damaged rollers, loose
pins, or kinks that cannot be freed. Lubricate the drive chain
(page 150) if it appears dry or shows signs of rust. Lubricate any
kinked or binding links and work them free. Adjust chain slack if
needed.
4. Check the drive chain slider (2) at the intervals specified in the
Maintenance Schedule.
The chain slider must be replaced if it is worn to the wear limit
line (3). For replacement, see your dealer.
Replace the slider when the depth of the grooves reaches the
service limit.
Service limit:
3.0 mm (0.12 in)
(3)
(2) drive chain slider
(3) wear limit line
146
Servicing Your Honda
Cut
here (2)