Table 3-5 Signals Available On The Test Points - Navman LA000578A Manual

20-channel gps receiver module development kit guide

Table of Contents

In addition to the configurable jumpers, there is a selection of test points on the board. The

signals available on the test points are shown in Table 3-5.

Table 3-5 Signals available on the test points

There are some settings that should not be changed when using the standard Jupiter 30 module

in conjunction with the development unit. These are as follows:

• SW2 must remain selected on 3.3 VDC

• Link for JB3/4 must be fitted

• Link for JB16/17 must be fitted

• SW3 DIP switch must be all off except SW3.3

Test point

Function

TXA

RXA

TXB

RXB

1PPS

not used

ground

Table of Contents

Jupiter 30 Aa003025-g