Equipment Required - Navman LA000507 Manual

5. Power adapter for 12 VDC vehicle operation
For mobile operation, an automotive adapter intended for use in 12 VDC vehicles is provided.
6. Software and documentation CD
The CD contains Jupiter 20 GPS receiver documentation and other information on how to
use GPS receivers. SiRFDemo and SiRFflash analysis software are also provided to allow
communication with the Jupiter 20 GPS receiver through a serial port. This Windows based
software presents the receiver's raw data in a geographical form, allowing both detailed analysis
and evaluation for both NMEA and SiRF Binary formats.

2.2 Equipment required

The following equipment is also required to evaluate the Jupiter 20 receiver.
• IBM compatible PC
• Minimum one serial port (If your PC only has USB, a USB/RS232 converter can be
employed)
• Windows 95/98, WinNT4.0 or higher
• 486 100MHz or higher
• SVGA at least 800x600 resolution
• 16 Megabytes of RAM
• 6 Megabytes (min) of disk space
LA000510C © 2006 Navman NZ Ltd. All rights reserved. Proprietary information and specifications subject to change without notice.
5