Navman iCN 620 User Manual page 87

NAVMAN iCN 620 user manual
4
5
6
7
Select the time format that you wish to use – 12 hour clock or 24 hour clock.
Go to the Settings – Simulator screen by pressing
Enable the Auto Simulate box to run an automatic route simulator. This allows you to program a route without
a GPS fi x (for example, from inside a building), and view the route without going anywhere. Refer to the section
below for more information on using the Automatic Simulator.
Enable the Repeat box to let the automatic route simulator run continuously.
or selecting Page Fwd.
87