Table Of Contents; General Information; Te 70-Atc/Avr And Te 80-Atc/Avr; Te 70-Atc/Avr Og Te 80-Atc/Avr - Hilti TE 70-D/AVR Operating Instructions Manual

ORIGINAL OPERATING INSTRUCTIONS
TE 70-D/AVR rotary hammer
TE 70-AVR, TE 70-ATC/AVR, TE 80-ATC/AVR combihammer
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Description
3 Insert tools, accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
In these operating instructions, the designation "the
power tool" always refers to the TE 70-D/AVR rotary ham-
mer or TE 70-AVR, TE 70-ATC/AVR or TE 80-ATC/AVR
combihammer.
TE 70-ATC/AVR and TE 80-ATC/AVR 1
Function selector switch
@
Control switch lock
;
Control switch
=
Supply cord
%
Button for 50% power reduction (only ATC combi-
& hammers)
Page
Side handle
1
(
Chuck
2
)
Dust shield
4
+
Insert tool unlocking device
4
§
Service indicator
6
/
Reduced-power indicator (only ATC combiham-
8
:
mers)
8
10
TE 70-D/AVR and TE 70/AVR 2
11
12
12
Function selector switch (only combihammers)
12
@
Control switch lock (only combihammers)
;
Control switch
=
Supply cord
%
Side handle
(
Chuck
)
Dust shield
+
Insert tool unlocking device
§
Service indicator
/
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning: Warning: hot
electricity surface
en
1