Installation - Siemens SISTORE AX8 250/100 V2.8 Installation Manual

Installation

6 Installation
10
Siemens Building Technologies
Fire Safety & Security Products
Always disconnect the power cable and other cables from the main power
CAUTION
supply before installing the device.
The SISTORE AX8/AX16 is designed to work with a variety of other equipment.
The basic system will consist of a video camera and system monitor.
Refer to the User Manual CD for details of installing each type of equipment.
Fig. 1 SISTORE AX16 rear panel
Step 1:
Video In: Connect cameras (up to 8/16) to camera BNC inputs. If looping is
required, connect camera out to second source (second BNC).
Step 2:
Video Out: Connect a monitor to a composite video output for multi-screen display
and playback.
Step 3:
Power connector: Apply power to the unit.
EN
12.2008