C Other information
When to show "No signal" or "out of Range":
If not have any signal, it will show "No signal" information in center of the Screen
If the V-Sync more than 85Hz or its solution more than SXGA it will show
"Out of Range" information in Center of the Screen
How to enter factory mode and Burning Mode:
If you Press [2] then Power on it will enter Factory Mode
Then it will add one Menu page named Factory Menu
Press "[2] "Button Enter Factory Menu item
Then Press"[2]" Button Enter Burn Mode
If Change new main board,
1. Enter Factory mode.
2. PC or chrom send 32 Gray scaler to monitor.
3. Press auto color
ViewSonic Corporation
b) Brightness Dialog
Press "[▲]" or "[▼]" Button to enter the Brightness Dialog.
Press "[1]" Button to exit the Brightness Dialog.
Press "[2]" Button to enter the Contrast Dialog.
Press "[▲]"Button to make brightness high.
Press "[▼]"Button to make brightness low.
c) Auto Image Adjust Dialog
Press "[2]" Button to do the auto image adjust function.
d) Analog/DIGITAL Dialog
Press "[2] "Button to switch Analog mode
Confidential - Do Not Copy
32
VX912