Casio WK-200 User Manual page 52

WK200_03_e.fm 50 ページ ２００８年７月３１日 木曜日 午後２時３４分
Recording Your Keyboard Play
To record to Tracks 1 through 6
1.
Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
"Recording and Playing Back Keyboard Play" (page
E-48).
Lights
Lights
2.
5
Press .
This will enter record standby.
Flashes
Flashes
3.
ck
Press a button from
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes
Flashes
• If you want to use a different tone than the one you
bp
used in Track 1, press
input the tone number.
4.
bm
Press .
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
5.
To stop recording, press
• To play back what you have recorded, press
bm
Each press of starts and stops playback.
E-50
co
to to select the track
bs
and then use (10-key) to
bm
.
bm
again.
6.
Repeat steps 2 through 5 to record the other
tracks.
7.
After you finish recording all of the tracks,
bm
press .
• This will start playback of the recorded tracks. Press
to stop or restart playback.
• At this time you can turn off playback of specific tracks
bt co
using buttons to . Pressing a key toggles playback
of each track on (track number displayed) or off (track
number not displayed).
• If you want to re-record a track, press
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
Disappears
8.
5
Press twice to exit the recorder mode.
Disappears
■ To delete a recorded track
After step 3 of the above procedure, do hold down
pressing any keyboard key) until the message "Tr.Del?"
appears on the display. Press [+] (YES) to delete the track, or
[–] (NO) to cancel the delete operation.
bm
5
. This will
5
(without
B