Getting Ready To Play; Preparing The Music Stand; Power Supply - Casio WK-200 User Manual

WK200_02_e.fm 8 ページ ２００８年５月１９日 月曜日 午後７時１４分

Getting Ready to Play

Preparing the Music Stand

Power Supply

Either an AC adaptor or batteries can be used to power this
Digital Keyboard. Normally, use of AC adaptor power is
recommended.
• The AC adaptor does not come with this Digital Keyboard.
Purchase it separately from your retailer. See page E-3 for
information about options.
Using the AC Adaptor
Use the AC adaptor when you want to power the Digital
Keyboard from a household electrical outlet.
Specified AC Adaptor: AD-5 (WK-200)
AD-12 (WK-500)
DC 9V terminal (WK-200)
DC 12V terminal (WK-500)
• Be sure to turn off Digital Keyboard power before
connecting or disconnecting the AC adaptor.
E-8
Using Batteries
• Be sure to turn off power before loading batteries.
Music stand
• It is up to you to prepare six commercially available
D-size batteries. Do not use oxyride batteries or any
other nickel based batteries.
1.
2.
3.
AC adaptor
Household power outlet
■ Low Battery Indication
The indicator shown below starts to flash to let you know
when battery power is low. Replace the batteries with new
ones.
Open the battery cover on the bottom of the
Digital Keyboard.
Load six D-size batteries into the battery
compartment.
Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
Insert the tabs of the battery cover into the
holes on the side of the battery compartment,
and close the cover.
Tabs
Low battery indicator
(flashes)