In Case Of Problem - Parrot MKi9200 Quick Start Manual

In case of problem

Before you begin
• Make sure the "Good bye" message is displayed on the
Parrot MKi9200 screen when you turn the ignition off.
► Refer to the Checking the wiring section for more
information.
• Make sure you have the latest software update on your
Parrot MKi9200. To do so, select
settings > Information. Compare this number with the one
on our website, Downloads section.
Problems while using the phone function
• Make sure your phone is compatible with the Parrot
MKi9200. To do so, refer to the compatibility list of the
Parrot MKi9200 available on our website www.parrot.com,
in the Support & Downloads section.
• If your phone is compatible with the Parrot MKi9200 and if
you already have the latest software update:
1. Erase the memory of the Parrot MKi9200. To do
so, select Settings > Advanced settings > Factory
settings.
2. On your telephone, erase the Parrot system from the
list of Bluetooth peripherals (or reboot your iPhone).
3. Repeat the linking procedure for the 2 devices.
20
Problems while using the music function
• Reboot your iPod / iPhone before connecting it to the
Parrot MKi9200.
dure will not erase any of your data) :
Settings > Advanced
• Some problems may occur if the iPod / SD card / USB
device is already connected to the Parrot MKi9200 before
you turn on the ignition. Connect the iPod / SD card / USB
device once the ignition is turned on.
• If your Parrot MKi9200 is connected to an iPhone and
an USB flash drive, the iPhone has priority: you can only
browse through your iPhone content.
• Make sure that your iPod is updated.
For any other problem or for more information
• Refer to the Parrot MKi9200 FAQ available on our website,
in the FAQ section.
• Consult
our website.
• Contact our support team (phone numbers / mail address
on the last but one page).
To reboot your iPod / iPhone (this proce-
- iPod : press Menu and
simultaneously until the iPod reboots.
- iPhone : Press the On/Off button and the Home button
simultaneously until the iPhone reboots. Do not touch
the screen when the message "Slide to shutdown"
appears.
the Parrot discussion
this proce-
the centre button
& help forum on