Parrot MKi9200 Quick Start Manual page 17

Pairing and connecting a phone
to the Parrot MKi9200
Prior to using your Parrot MKi9200 with your phone for the
very first time, you must initially pair both devices.
1. Make sure the Parrot MKi9200 is set so that it is visible
by all Bluetooth ® devices. To do so, press the jog wheel
and select Settings > Bluetooth > Visibility > Visible.
The Parrot MKi9200 is visible by default.
2. Press the jog wheel and select
Pair with...
> If your mobile phone's model appears in the list, select
it and confirm.
> If your mobile phone model doesn't appear in the list,
Other phones
select the option.
3. From your phone, search for
Refer to your phone user guide for more information.
> The list of the available Bluetooth peripherals
is displayed.
4. Select «Parrot MKi9200» in the list.
> You are prompted to enter a PIN code.
5. Enter «0 0 0 0» on your phone.
> «Pairing successful» is displayed on the screen of the
Parrot MKi9200.
> Once your phone is paired to the Parrot MKi9200,
the connection between both devices will be
automatically established each time you enter
Settings > Bluetooth >
Bluetooth peripherals.
your vehicle if your screen is plugged in.
Synchronising the phonebook
• With some Bluetooth phones, the phonebook is automati-
cally synchronized in the kit's memory. Only the contacts
stored in the phone memory are synchronized.
• If your phone doesn't support automatic synchronization,
you can also use the Object Push function of your phone to
send contacts from your mobile to the car kit via Bluetooth.
To do so:
1. Press the jog wheel and select
contacts.
> The kit says « Waiting for contact ».
2. Refer to your phones' user guide for more informa-
tion about sending contacts via Object Push.
Telephone > Receive
17