Sony DAV-DZ790K Operating Instructions Manual page 84

Note
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
• Do not insert anything other than the wireless
transmitter into the EZW-T100 slot.
3
Make sure to use the same screws to
secure the wireless transmitter.
Rear of the unit
SPEAKER TV
DIGITAL IN
OPTICAL COAXIAL
CENTER SUBWOOFER
Note
• Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
Tip
• When you change the S-AIR configuration, Sony
recommends that you perform [AUTO
CALIBRATION]. For details, see "Calibrating the
Appropriate Settings Automatically" (page 90).
84
GB
SPEAKER
FRONT R FRONT L SUR R SUR L
COAXIAL 75
EZW-T100
HDMI OUT
DMPORT
DC5V Y P /C P /C VIDEO R AUDIO IN L R AUDIO IN L
B B R R
0.7A MAX
COMPONENT VIDEO OUT OUT TV SAT/CABLE
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
ANTENNA
transmission.
FM
To set the ID of the unit
1
Press "/1 on the unit.
The system turns on.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until "S-AIR ID"
appears in the front panel display, then
press
Note
• When the wireless transmitter is not inserted in
the unit, "S-AIR ID" cannot be selected.
4
Press X/x to select the desired ID.
You can select any ID (A, B, or C).
5
Press
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
7
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
or c.
.
S-AIR main unit
(This unit)
ID A
ID A
S-AIR sub unit
ID A
S-AIR sub unit